1/2 Single-Notch Steel Strapping Sealer

Our single - notch steel strapping sealer is a must - have tool for working with steel strapping and pusher seals. It's the perfect solution to securely crimp your strapping and pusher seals. The operation is straightforward. First, slide a pusher seal onto the steel strapping. Then, manually wrap the steel strapping around the load and feed the strap end through the seal. Use our pusher tensioner to tighten the top - layer steel strap in the seal. Next, use this single - notch sealer to crimp the seal. Finally, cut off the excess strapping with our steel strapping cutter.

Using this single - notch steel strapping sealer is easy. First, get a pusher seal and slide it onto the steel strapping. Wrap the strapping around your load and make sure the end goes through the seal. Then, use the pusher tensioner to make the top - layer strap tight in the seal. After that, use the sealer to crimp the seal firmly. Once it's done, cut the extra strapping with the cutter. When using it, make sure your hands are dry and clean. Keep the sealer away from water to prevent rust. After each use, wipe it down with a dry cloth. If it gets dirty, you can use a mild cleaner to clean it. Store it in a dry place to keep it in good condition.