3/4 Single-Notch Steel Strapping Sealer

Our single - notch steel strapping sealer is perfect for use with steel strapping and pusher seals. It's an ideal tool to securely crimp the strapping and pusher seals. The operation is straightforward. First, slide a pusher seal onto the steel strapping. Then, manually wrap the steel strapping around the load and feed the strap end through the seal. Tighten the top - layer steel strap in the seal using our pusher tensioner. Next, use this single - notch sealer to crimp the seal. Finally, cut off the excess strapping with our steel strapping cutter.

Using this single - notch steel strapping sealer is easy. Start by sliding a pusher seal onto the steel strapping. Wrap the strapping around your load and pass the end through the seal. Use the pusher tensioner to make the top layer of the strap tight in the seal. Then, use the single - notch sealer to crimp the seal. After that, cut the extra strapping with the cutter. When using it, make sure the strapping is properly placed in the seal before crimping. For maintenance, keep it clean and dry. If it gets dirty, you can wipe it with a dry cloth. Store it in a cool and dry place when not in use.