1/2 Double-Notch Heavy Duty Steel Strapping Sealer

Our heavy-duty half-inch double-notch steel strapping sealer is a must-have tool for working with steel strapping and open seals. It's perfect for crimping your strapping and seals firmly in place. Using it is a breeze! First, manually wrap the steel strapping around the load. Then, tighten the strapping using our feedwheel tensioner. Next, apply an open seal and crimp it with this double-notch sealer. Finally, cut off the excess steel strapping with our strapping cutter. Check out our full range of steel strapping supplies too.

Using this steel strapping sealer is easy. Start by wrapping the steel strapping around your load. Make sure it's snug. Then, use the feedwheel tensioner to tighten the strapping. Once it's tight enough, place an open seal on the strapping. Take the double - notch sealer and crimp the seal. This will hold the strapping in place. After that, use the strapping cutter to get rid of the extra strapping. When using the sealer, keep your hands away from the crimping area to avoid injury. Also, store it in a dry place to prevent rust. Every now and then, clean the sealer with a dry cloth to keep it in good working condition.